CNC 4-axis machining adds a rotary axis (usually the A-axis, rotating about the X-axis, or the B-axis, rotating about the Y-axis) to traditional 3-axis (X, Y, and Z linear) lavorazione. By linking the rotary and linear axes, it enables efficient machining of complex workpiece surfaces, inclined holes, and multi-angle contours. Sotto, we explain:
High Programming Complexity
The linkage paths of the rotary and linear axes must be considered to avoid tool interference (per esempio., collisions between the tool and the workpiece or fixture during rotation). CAM software (such as UG or Mastercam) is typically used to automatically generate toolpaths and perform simulation verification.
Strict Precision Requirements for Rotary Axis
The positioning accuracy (generally around ≤±10″ for most machines, and up to ≤±5″ for high-end equipment) e ripetibilità (≤±3″) of the rotary axis directly impact machining quality and require regular calibration (per esempio., using a laser interferometer). Inoltre, the concentricity error between the rotary axis and the worktable should typically be controlled within 0.01 mm to avoid radial dimensional deviations of the workpiece.
Matching Tools and Cutting Parameters
When machining inclined or curved surfaces, the cutting angle constantly changes. It is important to select tools suitable for multi-angle cutting (such as ball-end milling cutters and bullnose milling cutters). Dynamically adjust the feed rate (F value) and spindle speed (S value) to avoid overcutting and poor surface quality.
Fixture Design Must Adapt to Rotation
The fixture must be lightweight and not interfere with the movement of the rotating axis, while ensuring rigid clamping of the workpiece (especially at high rotation speeds, where centrifugal force can cause the workpiece to loosen). Hydraulic chucks, indexing heads, or custom fixtures are typically used. The clamping force should be calculated based on the workpiece weight and rotational speed (per esempio., A 1000 giri/min, the clamping force should be greater than the centrifugal force of the workpiece, often designed with a ≥1.5× safety factor).
Informazioni su RapidEfficient
RapidEfficient è specializzata nella lavorazione CNC ad alta precisione con 18 anni di esperienza. I suoi prodotti coprono il settore medico, comunicazioni, ottica, droni, robot intelligenti, automobile, e parti di automazione dell'ufficio.
I centri di lavoro CNC dell'azienda includono quattro assi, cinque assi, e macchine utensili di collegamento, e sono dotati di proiettori di precisione, macchine di misura a tre coordinate, spettrometri, e altre apparecchiature di prova di precisione.
Precisione della lavorazione: fino a 0.01 mm
Precisione del test: fino a 0.001 mm
