CNC加工や試作品製作用のプラスチック材料を選択する場合, understanding how different plastics behave under heat and flame can be helpful, especially during material comparison or early design stages. Below is a general overview of four commonly used plastics: パソコン, PVC, ABS, and PP.
ポリカーボネート (パソコン)
PC is relatively difficult to ignite compared with many other thermoplastics. ほとんどの場合, it will stop burning once the flame source is removed.
When exposed to flame, PC typically produces a yellow flame accompanied by black smoke. After burning, the material tends to soften rather than drip. A mild but noticeable odor may also be present.
In terms of material characteristics, polycarbonate parts are usually pale yellow and can be either transparent or opaque. PC is well known for its high impact resistance and is often used in applications where strength and toughness are important.
Polyvinyl Chloride (PVC)
PVC is considered a flame-resistant plastic and is generally difficult to burn. Once the flame is removed, the material usually self-extinguishes.
During combustion, PVC shows a yellow flame with a greenish color near the base. The material softens under heat and releases a strong chlorine-like odor.
PVC products can be either rigid or flexible, depending on the formulation. The hardness can be adjusted, and finished parts may appear transparent or opaque. PVC is commonly used in piping, insulation, and electrical applications.
Acrylonitrile Butadiene Styrene (ABS)
ABS ignites easily and, unlike PC or PVC, will typically continue burning even after the flame source is removed.
When burning, ABS produces a yellow flame with black smoke and tends to melt and drip. The odor released during combustion is strong and slightly pungent.
ABS parts are usually opaque and have a slightly waxy surface feel. Because of its good machinability and balanced mechanical properties, ABS is widely used for functional prototypes and general-purpose plastic components.
ポリプロピレン (PP)
PP is also easy to ignite and burns quickly once exposed to flame. It does not self-extinguish under normal conditions.
The flame is usually yellow with a blue base, and the material burns rapidly and completely. A distinctive odor, often described as similar to diesel, can be noticed during combustion.
Polypropylene parts are typically milky white and may be transparent or opaque. PP offers good surface gloss, low density, and strong chemical resistance, making it suitable for lightweight and chemically resistant applications.
General Comparison
Each of these plastics shows different behavior when exposed to flame and heat:
- PC focuses more on impact strength with moderate flame resistance
- PVC provides inherent flame retardancy and flexible material options
- ABS is easy to machine but has higher flammability
- PP is lightweight and chemically resistant, though it burns easily
実際に, material selection should be based on mechanical requirements, safety considerations, and the intended manufacturing process rather than combustion behavior alone.
RapidEfficient について
RapidEfficient は、高精度 CNC 加工を専門としています。 18 長年の経験.
その製品は医療を含む産業にサービスを提供しています, コミュニケーション, 光学, ドローン, インテリジェントロボティクス, 自動車, およびOA部品.
同社の CNC マシニング センターは 4 軸を備えています, 5軸, およびマルチリンク工作機械, 精密プロジェクターも装備されています, 三次元測定機 (CMM), 分光計, などの高度な検査装置.
加工精度は以下に達します 0.01 mm, テスト精度は次のレベルに達します 0.001 mm.
