Заключение первое
При обработке алюминия на станках с ЧПУ, допуск определяет, насколько деталь может отличаться от ее расчетных размеров..
- Standard Tolerance (±0.10 mm / ±0.004″) – Best for brackets and housings
- Precision Tolerance (±0.02 mm / ±0.0008″) – Ideal for assemblies and fits
- Ультра-точность (±0,005 мм / ±0.0002″) – Used for aerospace, оптика, медицинский, and semiconductor parts
Choosing the correct tolerance is one of the fastest ways to balance machining cost and performance.
What Is Standard CNC Aluminum Tolerance?
Most CNC aluminum parts are commonly machined to around ±0.10 mm to ±0.127 mm (±0.005″) unless tighter tolerances are specified on the drawing.
For critical features such as bearing bores or mating surfaces, tighter tolerances may be required.
Standard CNC Aluminum Tolerance Chart
Many CNC suppliers follow general standards such as ISO 2768 for unspecified tolerances.
| Dimension Range (мм) | Стандартный | Точность | Ultra Precision |
|---|---|---|---|
| 0.5 к 6 | ±0.10 mm | ±0.02 mm | ±0,005 мм |
| 6 к 30 | ±0.20 mm | ±0.05 mm | ±0.010 mm |
| 30 к 120 | ±0.30 mm | ±0.10 mm | ±0.020 mm |
| 120 к 400 | ±0.50 mm | ±0.15 mm | Case by Case |
Inch Reference
| Metric | Inch |
|---|---|
| ±0.10 mm | ±0.004″ |
| ±0.05 mm | ±0.002″ |
| ±0.02 mm | ±0.0008″ |
| ±0,005 мм | ±0.0002″ |
Why Tolerance Directly Affects Cost
There is a direct relationship between tighter tolerances and higher cost.
| Tolerance Level | Cost Impact | Почему |
|---|---|---|
| ±0.10 mm | Низкий | Fast machining, standard tools |
| ±0.05 mm | Середина | More setup attention |
| ±0.02 mm | Высокий | Slower feeds, more checks |
| ±0,005 мм | Премиум | Thermal control, ШМ, advanced tooling |
Need pricing examples? Read our Aluminum Machining Cost Guide
Best Aluminum Alloys for Tolerance Stability
6061-Т6
The best all-around option for cost, обрабатываемость, and repeatable tolerances.
7075-Т6
Harder and more rigid. Excellent for demanding bores, threads, и конструктивные детали.
5052
Softer and more formable, but less ideal for ultra-tight tolerances.
Compare materials in our 5052 против 6061 Aluminum Guide
Geometric Tolerances Matter Too
Dimensions are only part of the story. Many assemblies fail due to geometry errors.
Important controls include:
- Плоскостность
- Концентричность
- Параллелизм
- Position Accuracy
For micron-level projects, see our ±0.005mm Precision Aluminum Case Study
Cost Saving Tip: Use Tight Tolerance Only Where Needed
Many drawings apply precision tolerances everywhere.
This often increases cost without improving function.
Better approach:
- Tight tolerance on bearing bores
- Standard tolerance on cosmetic outer faces
- Precision only on mating surfaces
This can significantly reduce machining cost.
Common Engineering Mistake: Over-Tolerancing
Many engineers default to ±0,01 мм on every dimension “just to be safe.”
Результат:
- Longer lead times
- More inspection cost
- Higher scrap risk
- No functional benefit
Always use the loosest tolerance that still allows the part to function correctly.
Часто задаваемые вопросы
What is the standard CNC tolerance for aluminum?
Many shops use around ±0.10 mm to ±0.127 mm (±0.005″) unless otherwise specified.
Can aluminum hold ±0.005 mm?
Да, with advanced machines, stable fixturing, thermal control, and CMM inspection.
Which is harder to hold: hole size or hole position?
Usually hole position over long distances is harder than simple diameter control.
Is 7075 more precise than 6061?
7075 is more rigid, но 6061 is often more economical and easier to machine.
Does anodizing affect tolerance?
Да. Anodizing adds coating thickness and should be considered for tight-fit parts.
What tolerance is best for low-cost parts?
For many general components, ±0.10 mm is the most economical option.
Need Help Choosing the Right Tolerance?
Send us your drawing for a free manufacturability review.
RapidEfficient helps customers optimize tolerance, расходы, and production feasibility for custom CNC aluminum parts.
