Blog List
Accuracy and Precision: When CNC Measurements Disagree
When a supplier and customer report different bore sizes, repeating one measurement until the same number appears does not settle…
Solution Annealing: What Changes in Stainless CNC Parts
Adding solution annealing to a stainless steel CNC order can change the material properties that the design relies on. A…
When a Machining Coolant Change Needs a New Trial
A supplier changes machining coolant while the drawing, material grade and CNC program stay the same. Must the part be…
Nitriding Process: Specify the Final Wear Surface
A steel guide block may be ordered with a nitrided wear face and a final grinding operation. Those instructions can…
High Speed Machining: Why RPM Does Not Set Cycle Time
A small pocket can take longer to mill than its programmed feed suggests, even on a machine with a high-speed…
Planning Surface Grinding for Thin CNC Plates
Before ordering surface grinding for a thin plate, agree how it will be held and how it will be measured…
H13 Tool Steel: Planning a Hot-Work Insert
A cooling hole can be straightforward to drill and still be poorly placed for a hot-work insert. The steel left…
Lapping Process for Flat Sealing Faces
A drawing note such as “lap sealing face” leaves several decisions open. The supplier may need to flatten an annular…
EDM Recast Layer: Specifying Removal and Inspection
An EDM-cut slot can meet its width and roughness requirements while its surface layer remains unverified. If the order requires…
