Blog List
What Is Stainless Steel Passivation and When Do CNC Parts Need It?
Stainless steel passivation is a chemical finishing process used after machining, deburring, and cleaning to remove free iron and surface…
CNC Machining Tolerance Chart: Standards by Material, Process, and Feature Type
Conclusion First CNC machining tolerance depends on material, feature type, part geometry, fixturing, cutting heat, machine condition, tool wear, and…
PEEK vs POM for CNC Machining: Which Plastic Should You Choose?
Conclusion First For most precision mechanical applications, POM / Delrin is usually the more cost-effective choice. It machines cleanly, holds…
Best Plastics for CNC Machining: PEEK, PTFE, Nylon, POM & More
Quick Answer: Which Plastic Is Best for CNC Machining? POM is often the most practical all-around plastic for CNC-machined mechanical…
CMM Inspection for CNC Machined Parts: What Buyers Should Check
Quick Answer: What Should Buyers Check in a CMM Report? A useful CMM inspection report should show more than a…
CNC Machining Tolerance Stack-Up: Formula, RSS, and Practical Example
CNC machining tolerance stack-up is the combined effect of dimensional variation across several features, datums, setups, fixtures, and inspection references.…
CNC Machining PEEK Parts: A Representative Tolerance-Control Case
REPRESENTATIVE CASE STUDY This representative engineering case uses simplified geometry, requirements, and process illustrations to explain tolerance control for a…
5-Axis CNC Machining of an Aluminum Housing
REPRESENTATIVE ENGINEERING CASE This engineering case uses a simplified aluminum housing model to demonstrate how datum planning, workholding, tool access,…
Aluminum vs Plastic Parts: How to Choose for CNC Machining and Production
Choosing between aluminum and plastic is not simply a question of which material is stronger or cheaper. The decision usually…
