Blog List
5-Axis CNC Machining of an Aluminum Housing
REPRESENTATIVE ENGINEERING CASE This engineering case uses a simplified aluminum housing model to demonstrate how datum planning, workholding, tool access,…
Aluminum vs Plastic Parts: How to Choose for CNC Machining and Production
Choosing between aluminum and plastic is not simply a question of which material is stronger or cheaper. The decision usually…
Surface Finish Guide for CNC Machined Aluminum | Achieve Ra 0.8
REPRESENTATIVE CASE STUDY Achieving Ra 0.8 on Critical Surfaces of a CNC-Machined Aluminum Housing This case shows how surface-finish requirements…
CNC Brass Electrical Connector Manufacturing Case: Thread, Burr, and Plating Control
A CNC-turned brass connector may appear simple, but its functional performance can depend on several closely related features: thread engagement,…
Aluminum vs Brass: Which Is Better for CNC Machined Parts?
Quick Answer: Should You Choose Aluminum or Brass? Choose aluminum—often 6061-T6 or 6061-T651—for weight-sensitive housings, brackets, heat sinks, fixtures, and…
7075 Aluminum vs Grade 5 Titanium: Which Is Better for CNC Parts?
Choose by Service Conditions, Not Material Prestige 7075-T6/T651 aluminum and Ti-6Al-4V Grade 5 titanium can both work well for high-performance…
High-Speed CNC Aluminum Cutting Guide: How to Cut Faster Without Burrs or Tool Wear
Conclusion First High-speed CNC aluminum cutting can dramatically reduce cycle time and lower production cost—but only when the process is…
Best Aluminum for Precision Machining: Top Alloys Compared
Quick Answer: Which Aluminum Is Best for Precision Machining? For most general precision CNC parts, 6061-T651 plate or a suitable…
CNC Aluminum Tolerance Guide: Practical Limits by Feature
CNC aluminum tolerance should be selected by feature and function, not by applying one tight number to the entire drawing.…
