Blog List
ABS vs Polypropylene for a Machined Equipment Cover
A plastic cover can withstand a cleaner and still be an unsuitable replacement if its internal pad will no longer…
A2 vs D2 Steel for Replaceable Tooling Inserts
A2 and D2 are both cold-work tool steels, but they address different balances of wear and edge damage. D2 is…
PPAP vs FAI: What the Process Evidence Adds
PPAP and FAI require different work from a CNC supplier. A formal first article inspection verifies that the prescribed production…
Swiss Lathe vs CNC Lathe for a Stepped Pin
A long, thin section of a workpiece can deflect under cutting force. Swiss-type turning addresses that problem by supporting the…
Powder Coat vs Paint: Plan the Cure and Assembly
Powder coating can suit a machined metal part that can be prepared, coated, and cured before heat-sensitive components are installed.…
Titanium vs Stainless Steel: Recheck the Mating Parts
Titanium can be worth considering when a stainless steel CNC part misses a weight target or faces a corrosion problem…
Sinker EDM vs Wire EDM: Check the Electrode Path
Choose between sinker EDM and wire EDM by checking how the electrode can reach the feature while leaving the required…
Hot Rolled vs Cold Rolled Steel: Buying Machining Stock
For CNC parts, cold-rolled steel is worth considering when its supplied surface and dimensions can remove work from the manufacturing…
HDPE vs UHMW: Choosing Plastic for Machined Wear Parts
For machined guides, wear strips, and contact pads, UHMW is usually the better starting point when repeated sliding and abrasion…
