Blog List
ABS vs Polycarbonate for Machined Housings
Choose between ABS and polycarbonate (PC) for a machined housing by matching the offered stock grade to the service conditions…
Thread Size Chart for Matching CNC Parts and Fasteners
Use a thread size chart to match both nominal diameter and pitch to the mating component. In M8 × 1.25,…
Angularity GD&T: Why the Measuring Direction Matters
For a CNC wedge with a 45° seating face, the inspection scope depends on which requirement the supplier is quoting.…
Surface Finish Symbols: What the Drawing Requires
A cast housing can have a machined mounting face beside an outer wall that must remain unmachined. Surface finish symbols…
End Milling a Closed Pocket: Entry, Walls and Floor
On a drawing, a closed pocket is an empty shape. In a solid blank, that space is still metal. The…
Choosing Spring Steel Material for a CNC Spring Finger
A spring finger in a CNC assembly must deliver the required contact force over its working travel and recover when…
Accuracy and Precision: When CNC Measurements Disagree
When a supplier and customer report different bore sizes, repeating one measurement until the same number appears does not settle…
Solution Annealing: What Changes in Stainless CNC Parts
Adding solution annealing to a stainless steel CNC order can change the material properties that the design relies on. A…
When a Machining Coolant Change Needs a New Trial
A supplier changes machining coolant while the drawing, material grade and CNC program stay the same. Must the part be…