Blog List
Drilling vs Milling for CNC Hole Patterns
A CNC order can contain hundreds of repeated holes and only a few different diameters. Another order can contain fewer…
Normalizing vs Annealing: Can the Steel Condition Change?
Suppose a coupling-hub drawing calls for “1045 steel, normalized,” while a supplier offers “1045 steel, annealed.” Matching the grade has…
ABS vs Polypropylene for a Machined Equipment Cover
A plastic cover can withstand a cleaner and still be an unsuitable replacement if its internal pad will no longer…
A2 vs D2 Steel for Replaceable Tooling Inserts
A2 and D2 are both cold-work tool steels, but they address different balances of wear and edge damage. D2 is…
PPAP vs FAI: What the Process Evidence Adds
PPAP and FAI require different work from a CNC supplier. A formal first article inspection verifies that the prescribed production…
Swiss Lathe vs CNC Lathe for a Stepped Pin
A long, thin section of a workpiece can deflect under cutting force. Swiss-type turning addresses that problem by supporting the…
Powder Coat vs Paint: Plan the Cure and Assembly
Powder coating can suit a machined metal part that can be prepared, coated, and cured before heat-sensitive components are installed.…
Titanium vs Stainless Steel: Recheck the Mating Parts
Titanium can be worth considering when a stainless steel CNC part misses a weight target or faces a corrosion problem…
Sinker EDM vs Wire EDM: Check the Electrode Path
Choose between sinker EDM and wire EDM by checking how the electrode can reach the feature while leaving the required…
