Blog List
Casting Defects: Should This Bracket Go to Machining?
“Can we blend these marks and machine the batch?” Before answering, ask the supplier to point to each mark on…
Polypropylene vs Polyethylene: Will the Rack Insert Fit?
A removable plastic insert can fit a metal rack at room temperature and still jam after a warm wash. Machining…
Quenching and Tempering: Before or After CNC Machining?
Start with the drawing and the material specification it references. If either requires quenching and tempering after rough machining, plan…
ABS vs Polycarbonate for Machined Housings
Choose between ABS and polycarbonate (PC) for a machined housing by matching the offered stock grade to the service conditions…
Thread Size Chart for Matching CNC Parts and Fasteners
Use a thread size chart to match both nominal diameter and pitch to the mating component. In M8 × 1.25,…
Angularity GD&T: Why the Measuring Direction Matters
For a CNC wedge with a 45° seating face, the inspection scope depends on which requirement the supplier is quoting.…
Surface Finish Symbols: What the Drawing Requires
A cast housing can have a machined mounting face beside an outer wall that must remain unmachined. Surface finish symbols…
End Milling a Closed Pocket: Entry, Walls and Floor
On a drawing, a closed pocket is an empty shape. In a solid blank, that space is still metal. The…
Choosing Spring Steel Material for a CNC Spring Finger
A spring finger in a CNC assembly must deliver the required contact force over its working travel and recover when…